Skip to content

Mon–Fri: 9:00 AM – 5:00 PM

Vital Ease — home modification and maintenance solutions

How long doesyour ramp need to be?

Enter the height of your step and the calculator draws your ramp to scale. It shows the type of ramp you need, how long it will be, and where it needs a flat landing.

Ramp calculator

Try your ownmeasurements.

180 mm1.80 m of ramp · 1:10Height shown ×3.0 for clarity

The height from the ground to the top of the step or door sill, in millimetres.

Ramp type

1:14 means 14 mm along for every 1 mm up.

At each landing part-way

Step and threshold ramps are one short run, so they never turn.

The longest clear run available, in metres. A turning ramp folds to fit it.

A 180 mm rise as a step ramp at 1:10 needs 1.80 m of ramp. Footprint about 4.20 m by 1.00 m.
Minimum ramp run
1.80 m
Gradient
1:10
10.00% · 5.7°
Landings part-way
0
Footprint, about
4.2 × 1.0 m

A step ramp

For a single step up to 190 mm, no longer than 1.9 metres. A rubber ramp or a small built ramp suits. If you have the room, a 1:14 ramp is easier to push up.

See rubber ramps
Ramp options for this rise
TypeGradientMin runStatus
General access ramp1:142.52 mAllowed for this rise
Step ramp1:101.80 mAllowed for this rise
Threshold ramp1:81.44 mNot suitable

This is a guide based on the Australian Standard for access (AS 1428.1), not a design. A safe ramp also depends on its width, rails, edges, surface, and the door at the top. That is why we measure and design every ramp on site.

Understanding the numbers

What each gradientmeans for you.

  • A long, gentle ramp (1:14)

    For anything higher than one step. The ramp rises 1 cm for every 14 cm of length. It needs a flat landing at least every 9 metres, and at a home it usually turns at a landing to fit the space.

  • A step ramp (1:10)

    For a single step up to 190 mm. It rises 1 cm for every 10 cm, and can be no longer than 1.9 metres. Good where space is tight, though a gentler ramp is easier to push a wheelchair up.

  • A threshold ramp (1:8)

    Only for a door sill up to 35 mm, and no longer than 280 mm. It is the steepest slope the standard allows, and only for this.

  • Landings and turns

    A flat landing is at least 1.2 metres long. Turning a corner needs a landing at least 1.5 by 1.5 metres, and turning right around needs one at least 2.07 by 1.54 metres. There must be at least 1 metre of clear space between the handrails.

Found yourramp type?

See the ramps we fit for your step, with photos of our work.

  • Rubber ramps

    For a doorway lip or a single step. Nothing is fixed down, and it is often in place the same day.

  • All ramps

    Every ramp we fit, from small aluminium ramps to timber and composite, and how we choose.

  • Wheelchair access ramps

    For anything higher than one step. Built on site, with flat landings and rails on both sides.

Got your numbers? We will measure the site, check the space, and give you a written quote for the ramp. It is free, with no obligation.

Let us make your homework for you.

Ready to start your modification journey? Contact our team.

Ready to make your home safer and more accessible? Our team is here to help from your first consultation through to the final handover. Let’s talk about what’s possible for your home.

+61 3 8658 1358Contact us
Open
Mon–Fri: 9:00 AM – 5:00 PM
Serving
Melbourne & Sydney

Before you go

Still working outwhat your home needs?

A five-minute call is usually enough to tell you what is possible and roughly what it costs — no obligation, no pressure.